bmw m5

Kidney Grill Removal BMW E90 E91 E92 E93

Kidney Grill Removal BMW E90 E91 E92 E93

3 Series, BMW, E90 E91 E92 E93 (2005-2011)

Kidney Grill Removal BMW E90 E91 E92 E93

Removing the kidney grill from BMW E90 E91 E92 E93 will be done in 2 stages:

1.Removing the grilles from the bumper
2.Removing the hood ornaments

Removing the grilles from the bumper

To remove the grills from the bumper , remove the screws at the top . You will need a T30 torx. Removing these screws is necessary to have access behind the grills.

Press each grill support clip until is released. Each grill has 7 support clips.

Installing the new grills is very easy. Place the grill in position and gently press it until it clicks.

Now you can tighten the screws of the bumper in place.

Removing the hood ornaments

To remove the ornaments from the hood, you have to remove the six screws, three for each ornament. You will need a T20 torx.

Installing the new ornaments is very simple. Place the new ornaments in position and tighten all six screws.

To see how the kidney grills are replaced on the BMW E90 E91 E92 E93, I invite you to watch the following video tutorial:

SUBSCRIBE TO MY YOUTUBE CHANNEL

DISCLAIMER :

This article is only for informative purposes. We do not take any responsibility and we are not liable for any damage you produce as a result of using the information contained by this article . Use the information at your own risk . Thank you for your understanding !

How to Replace Battery BMW Smart Key Fob Confort Access E Series

How to Replace Battery BMW Smart Key Fob Confort Access E Series

1 Series, 3 Series, 5 Series, BMW, E60 E61 (2003-2010), E81 E82 E87 E88 (2004-2013), E90 E91 E92 E93 (2005-2011), X series, X5 E70 (2007-2013), X6 E71 (2008-2014)

How to Replace Battery BMW Smart Key Fob Confort Access E Series

This article refers to the key of those cars equipped with the Confort Access system. The cars that doesn’t come equipped with this option, unfortunately, have an encapsulated key case, because the battery is charged while the key is in the ignition , by induction.

In the case of cars without Confort Access, replacing the battery is more difficult, because the key case must be cut, replaced the battery and a new case must be installed.

Battery type: CR2032

Replacement time: 1 minute

To see how the key battery can be replaced, I invite you to watch the following video tutorial :

SUBSCRIBE TO MY YOUTUBE CHANNEL

DISCLAIMER :

This article is only for informative purposes. We do not take any responsibility and we are not liable for any damage you produce as a result of using the information contained by this article . Use the information at your own risk . Thank you for your understanding !

Cabin Filter Microfilter Replacement BMW E90 E91 E92 E93

Cabin Filter Microfilter Replacement BMW E90 E91 E92 E93

3 Series, BMW, E90 E91 E92 E93 (2005-2011)

Cabin Filter Microfilter Replacement BMW E90 E91 E92 E93

In this article I will show you how to replace the microfilter on BMW E90 E91 E92 E93.

The microfilter is also known as the cabin filter.

Its function is to filter pollen, dust, soot and any other physical contaminants that enters the car’s cabin, through the ventilation system.

In addition to the classic filters, active carbon filters and antibacterial filters have appeared on the market, which, although they are more expensive than the classic ones, they have the great advantage that, in addition to solid physical contaminants, they can also stop odors or gases from the environment,  and can also have an antibacterial role.

Classic microfilter

The classic microfilter is used to stop solid matters such as dust, soot or pollen.

The price of a classic microfilter is usually lower than an active carbon filter or an antibacterial filter.

Active carbon microfilter

Unlike the classic microfilter, an active carbon filter has the ability to capture dangerous gases to health, such as ozone or nitrogen dioxide, from the air, thanks to the additional layer of active carbon.

The disadvantage of such a filter is the higher price.

Antibacterial microfilter

With this mkicrofilter, protection will be maximum.

In addition to all the functions listed above, this filter has properties that can neutralize the entry of bacteria from the air into the passenger compartment of your car, as well can stop the formation of bacteria in the materials from which it is fabricated .

Replacing the microfilter

Regular replacement of the microfilter is essential, even if many of us would be tempted to neglect it, because it gradually loses its efficiency.

The replacement period of the filter differs from one product to another, but it is recommended to replace it at most once a year.

To see how to replace the microfilter on the BMW E90 E91 E92 E93, I invite you to watch the following video tutorial:

Replacement time: 3 minutes

Required tools: 8mm socket wrench

OE product code: 64319313519

SUBSCRIBE TO MY YOUTUBE CHANNEL

DISCLAIMER :

This article is only for informative purposes. We do not take any responsibility and we are not liable for any damage you produce as a result of using the information contained by this article . Use the information at your own risk . Thank you for your understanding !

Hidden Menu BMW E39 All Codes

Hidden Menu BMW E39 All Codes

5 Series, BMW, E39 (1995-2004)

Hidden Menu BMW E39 All Codes

To access the hidden menu on the BMW E39, follow these steps:

1. Turn ON the ignition

2. Press and hold the cluster button until test appears

3. To unlock all menus, go to the UNLOCK menu with number 19

4. Press the cluster button, when you see the OFF option on the display

To see how to access the hidden menu step by step , I invite you to watch the following video tutorial:

Detailed list of functions :

1 Car Engine and cluster data

1.0 Chassis nr/VIN serial number (last 5 digits)

1.1 K-number

1.2 Cluster Part

1.3 Coding (04)/diagnosis (52)/bus index (10)

1.4 1200 Week (12)/year of manufacture (2000)

1.5 Hardware (09) and software # (16.0) of cluster

1.6 Not used

1.7 CAN-version (04) KI-revision index (44)

2 (test) Cluster System Test – Activates the gauge drivers, indicators and LEDs to confirm function

3 SI Data

3.0 1098 Used fuel in liters since last SI (Service Inspection)

3.1 0231 Periodic inspection days; elapsed days (since last SI)

4 Momentary Consumption

4.0 0145+ Instant fuel consumption – 0145=14.5 liters/100km

4.1 0018 Instant fuel consumption – 0018=1.8 l/Hour

5 Distance Gone Consumption

5.0 082 Average mileage; 082=8.2 liters/100km

5.1 0536 Calc. km to refuel

6 Fuel Level sensor inputs in liters

6.0 1 09330+ Fuel level averaged; Left half sensor input=10.9 liters; Right sensor input=33.0 liters

6.1 0439+ Total tank level averaged; vlgs 6.0: 10.9+33.0=43.9 liters

6.2 0442+ Indicated value (44.2) and tank phase

7 Temperature and Speed

7.0 021+ Coolant/Engine temperature (2.1C)

7.1 130 Ambient/Outside temperature – chg met 5 pts. 125/130/135

7.2 + Engine speed / Current RPMs 1/min

7.3 + Vehicle speed / Current Speed in km/hour 8 Input value in HEX form

8.0 1d0+ System voltage ADC-Value Hex code

8.1 26C33C+ ADC Values HG left/HG right

8.2 0000 ADC Value brake degradation sensor (000=o.k.)

8.3 18C ADC Value outside temperature

9 Battery

9.0 140 Battery Voltage – 140 = UB 14.0v

9.1 242013+?

9.2 074_78+?

9.3 0011+?

10 Not used

11 Not used

12 Not used

13 Gong Test

14 Not used

15 Status cluster I/O-ports (bit codes) 0=low; 1=high 1st-belt contact, seat belt fastened=0; 2) ignition lock contact, key inserted=0; 3) door contact, door open=0; 4) clock button pressed=0; 5) SI reset=0, for reset=0; 6) EGS transmission failure=0 Status Digital Outputs (bits) 0=inactive, 1=active 1) Gong output; 2) Brake warning lamp; 3) Low fuel warning lamp; 4) EGA lamp; 5) seat belt lamp; 6) manipulation dot

16 Not used

17 Not used

18 Not used

19 Lock Status; unlocks functions in range 3-18

19.0 L-On/L-Off Unlock: press button when “L-Off”

20 Not used

21 Software Reset; reset OBC settings\

SUBSCRIBE TO MY YOUTUBE CHANNEL

DISCLAIMER :

This article is only for informative purposes. We do not take any responsibility and we are not liable for any damage you produce as a result of using the information contained by this article . Use the information at your own risk . Thank you for your understanding !

Front Turn Signal Indicator Replacement BMW E90 E91

Front Turn Signal Indicator Replacement BMW E90 E91

3 Series, BMW, E90 E91 E92 E93 (2005-2011)

Front Turn Signal Indicator Replacement BMW E90 E91

In this article, I will show you how to replace the turn signal light bulbs on the front.

The method of replacing the light bulb is very simple and can be done by anyone, even by someone without experience in mechanics.

The turn signal light is a very important light, because the traffic participants will be able to know your intention to change the direction of travel.

More than that, driving a vehicle on public roads with non-functional turn signal bulbs will result in a fine + withholding of the registration certificate.

Bulb model: PY21W Silver

Replacement time: 3 minutes

To see how to replace the front turn signal bulb on the BMW E90 E91, I invite you to watch the following step by step video tutorial:

SUBSCRIBE TO MY YOUTUBE CHANNEL

DISCLAIMER :

This article is only for informative purposes. We do not take any responsibility and we are not liable for any damage you produce as a result of using the information contained by this article . Use the information at your own risk . Thank you for your understanding !

Side Marker Bulb Replacement BMW E90 E91 E92 E93 E60 E61 E87

Side Marker Bulb Replacement BMW E90 E91 E92 E93 E60 E61 E87

1 Series, 3 Series, 5 Series, BMW, E60 E61 (2003-2010), E81 E82 E87 E88 (2004-2013), E90 E91 E92 E93 (2005-2011), X series, X5 E70 (2007-2013), X6 E71 (2008-2014)

Side Marker Bulb Replacement BMW E90 E91 E92 E93 E60 E61 E87

In this article, I will show you how to replace the bulbs on the side turn signal markers .

The method of replacing the light bulb is very simple and can be done by anyone, even by someone without experience in mechanics.

The side turn signal light is a very important light, because the traffic participants on your side will be able to know your intention to change the direction .

Bulb model: T10 yellow

Replacement time: 2 minutes

To replace the side turn signal bulb , on BMW E90 E91 E92 E93 E60 E61 E87, I invite you to watch the following step by step video tutorial:

SUBSCRIBE TO MY YOUTUBE CHANNEL

DISCLAIMER :

This article is only for informative purposes. We do not take any responsibility and we are not liable for any damage you produce as a result of using the information contained by this article . Use the information at your own risk . Thank you for your understanding !